DISPLAY REDONDO 1.28i 240x240 65K RGB

:LCD01146
15,60 €
preço com IVA incluído

Este display RGB de 1.28 polegadas tem o formato ideal para contruires o teu própio relógio usando um Arduino ou uma Raspberry Pi.

Se quiseres saber mais sobre este producto, consulta a sua Wiki Page.

Quantidade

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

1.28" ROUND LCD DISPLAY MODULE

Embedded GC9A01 Driver, Using SPI Bus

Comes with examples for Raspberry Pi, Arduino, STM32, etc.

 1.28inch-LCD-Module-details-1.jpg
 

Features At A Glance

  1. 240×240 resolution, 65K RGB colors, clear and colorful displaying effect
  2. SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32
  3. Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
 

Specifications

OPERATING VOLTAGE

3.3V / 5V

RESOLUTION

240 × 240 pixels

COMMUNICATION INTERFACE

4-wire SPI

DISPLAY SIZE

Φ32.4mm

DISPLAY PANEL

IPS

PIXEL SIZE

0.135 × 0.135mm

DRIVER

GC9A01

DIMENSIONS

40.4 × 37.5mm Φ37.5mm
 
 

Controlled Via SPI Bus

Supports Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

1.28inch-LCD-Module-details-3.jpg

VCC

Power (3.3V / 5V input)

GND

Ground

DIN

SPI data input

CLK

SPI clock input

CS

Chip selection, low active

DC

Data/Command selection (high for data, low for command)

RST

Reset, low active

BL

Backlight

 

 

Hardware Connection

 

1.28inch-LCD-Module-details-7.jpg1.28inch-LCD-Module-details-9.jpg
1.28inch-LCD-Module-details-11.jpg
 

Outline Dimensions

1.28inch-LCD-Module-details-size.jpg
 

Resources & Services

res_banner.png

 
 

Package Content

Weight: 0.015 kg

  1. 1.28inch LCD Module x1
  2. PH2.0 8PIN 20cm cable x1
11.28inch-LCD-Module-2_220.jpg2PH2.0-wire-20cm-8PIN_93.jpg

 

LCD01146

Também poderá gostar