Modódulo Sensor Fotosensível c/ potênciometro
  • Modódulo Sensor Fotosensível c/ potênciometro

Módulo Sensor Fotosensível c/ potênciometro

:SEN04020
1,14 €

Módulo sensor de luz LDR com saída Analógica e saída Digital ajustável mediante potenciómetro

Quantidade

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

Module Features: 

  • Using the sensitive type photoresistor sensor 
  • The comparator outputs a signal clean, good waveform driving ability more than 15mA. 
  • With adjustable potentiometer can adjust the light intensity detected 
  • The working voltage: 3.3V-5V 
  • The output format: Digital switching output (0 and 1) 
  • With a fixed bolt holes for easy installation 
  • Small PCB board size: 3.2cm x 1.4cm 
  • Using a wide woking voltage range LM393 comparator 
  • Application: Light intensity is detected, the light intensity sensor, smart car search light module 

 

Module Instructions 

  • Photosensitive resistor module most sensitive to environmental light, generally used to detect the brightness of ambient light, triggering microcontroller or relay module; 
  • When ambient light intensity does not reach the threshold value, the module DO-side output high when the ambient light level exceeds the set threshold, DO terminal output low; 
  • DO output can be directly connected to the microcontroller through the microcontroller to detect high and low, thereby detecting the brightness of ambient light changes; 
  • DO output can directly drive the relay module, which can be composed of a light control switch. 
  • Analog output and AD module, through AD conversion, can obtain more accurate values of ambient light

 

Product wiring instructions: 

  • VCC for positive power supply 3.3-5V 
  • GND for power supply is negative 
  • DO TTL switching signal output
  • AO analogue signal output
SEN04020

Também poderá gostar