• Novo

ProtoBoard Pro Face Dupla 100x75mm

: CEL05055
2,60 €
preço com IVA incluído

ProtoBoard pro com dupla face de 100x75mm

Quantidade

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

Introduction

This is a very basic double sided prototyping board with standard 0.1" spacing with 4x3mm (0.16x0.12") holes for mounting. The leaf pads makes you great for quickly prototyping stackable circuits. You can not only solder DIP components but also solder SMD components.

You can solder the digital & analog IO pins and plug them into Arduino, so that the proto board can directly communicate with Arduino like a simple shield. See the following picture, a simple light water project with Arduino.

Specification

  1. Compatiblity:DIP & SMD components

  2. Mounting Holes:3x4mm (0.12x0.16")

  3. Size:100x75mm (3.94x2.95")

 

Documents

 

Shipping List

  1. ProtoBoard Pro -Double Sided x1

CEL05055

Produtos Associados