CONJUNTO BICO EXTRUSOR PARA FLASHFORGE ADVENTURER 3 - 0.4mm 265ºC

:IMP05017
59,00 €
preço com IVA incluído

Com este conjunto do bico de extrusão de alta temperatura pode fazer um excelente upgrade à sua impressora 3D Adventurer 3, aumentando a temperatura máxima de extrusão de 240ºC para 265ºC! Assim, a impressão de filamentos como PET e BAS fica mais facilitada

 

Quantidade

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

This is a high-temperature version Nozzle Assembly for Adventurer 4 and Adventurer 3 series that allows you to print advanced filaments such as PC, PETG, PLA, and ABS.

  • Nozzle supports PC, PETG, PLA, ABS materials.
  • Works with Adventurer 4, Adventurer 3, Adventurer 3 Pro, Adventurer 3 Lite, Adventurer 3C.
  • Use method is the same as the conventional nozzle.
  • Extruder diameter: 0.4mm
  • Maximum temperature 265℃.
  • Packing specifications: 1pcs/bag.

Note: This nozzle's wire feeding resistance is slightly larger than that of the 240℃ nozzle assembly. It is recommended to use a 240℃ nozzle assembly to print conventional PLA materials.

IMP05017

Também poderá gostar