Broca p/ PCBs - 0.7mm
  • Broca p/ PCBs - 0.7mm
  • Broca p/ PCBs - 0.7mm
  • Broca p/ PCBs - 0.7mm

Broca p/ PCBs - 0.7mm

:FER06007
2,95 €
preço com IVA incluído

Broca para Placas de Circuito Impresso para furos com 0.7mm de diâmetro. O encaixe na máquina é de 3,175mm (1/8'') de diâmetro.

 

Quantidade

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

  • If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to pattern out traces. But that's only half the job! You'll also need a way to drill some tiny and accurate holes.  That's why we've started selling these PCB drill tips in a variety of sizes.

    They're made from carbide (tungsten steel) and are suitable for circuit boards, electronics, SMT, molding, metal processing, telecommunications, and other uses.  Each drill tip has a high hardness, wear resistance and strength and they're also super sharp which helps when drilling through PCBs.  The drill bits also don't easily bend or break and come in a nice plastic case to store your tips when you're not using them.

    This product comes with one 0.7mm Carbide PCB Drill Bit in a protective plastic case.

     

     

  • TECHNICAL DETAILS

    • Total length: 38mm
    • 1/8" Shank
    • Diameter: 0.7mm
FER06007

Também poderá gostar