Kit de sensores e placa de Expansão p/ Raspberry Pi
  •  Kit de sensores e placa de Expansão p/ Raspberry Pi
  •  Kit de sensores e placa de Expansão p/ Raspberry Pi
  •  Kit de sensores e placa de Expansão p/ Raspberry Pi

Kit de sensores e placa de Expansão p/ Raspberry Pi

:PCO01047
47,32 €
preço com IVA incluído

Pack acessórios (tipo D) para Raspberry Pi, incluindo Expansion Board ARPI600, vários sensores, suporta Arduino
 

Nota: Raspberry Pi não incluído.

Quantidade
Últimos artigos em stock

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

 

Overview

An accessories Pack (type D) to be used with Raspberry Pi. It consists of expansion board ARPI600, various sensors, and features Arduino connectivity support.

 

Supported Pi

  • Raspberry Pi 1 Model A+
  • Raspberry Pi 1 Model B+
  • Raspberry Pi 2 Model B

 

ARPI600 Features

  • Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
  • XBee connector for connecting various XBee modules
  • Sensor interface for connecting various sensors
  • Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
  • Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
  • Onboard RTC

 

What's on the ARPI600

Raspberry Pi Expansion Board on board resource

  1. Arduino connector : for connecting Arduino shields
  2. ICSP interface : Arduino ICSP
  3. XBee connector : for connecting XBee communication modules
  4. Sensor interface : for connecting sensors
  5. Raspberry Pi connector : for connecting Raspberry Pi
  6. USB TO UART
  7. TLC1543 : AD converter
  8. PCF8563 : RTC
  9. CP2102
  10. 32.768KHz crystal : for RTC
  11. Power indicator
  12. XBee state LED
  13. XBee and Arduino interface RESET button
  14. XBee EASYLINK button
  15. RTC battery holder : for CR1220 button battery
  16. TLC1543 reference voltage configuration jumper
  17. RTC jumper
  18. UART jumper
    • when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
    • when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
    • when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
  19. Arduino AD selection jumper
    • short 2 and 3 : Arduino A0-A5 as AD input
    • short 1 and 2 : Arduino A0-A5 as digital control
  20. Arduino I2C selection jumper
    • short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
  21. Arduino SPI selection jumper
    • short 1 and 2 : Arduino D11-D13 as SPI control (default)
    • short 2 and 3 : Arduino D11-D13 as digital control

 

 

Downloads

Development resources:Image, schematic, dimension, software, etc.
Download: www.waveshare.com/wiki/RPi_Acce_D


Package Contains

  1. ARPI600 x 1
  2. Sensors Pack × 1
  3. USB Type A Plug to Micro B Plug Cable x 1
  4. USB type A plug to mini-B plug cable x 1
  5. RPi screws pack (2pcs) x 1

 


 

Raspberry Pi Model A+ Selection Guide

Package ContentsProducts
ItemDescriptionAcce. APackage AAcce. CPackage CAcce. DPackage D
RPi A+ Raspberry Pi Model A+      
DVK512 Expansion Board, provides expansion interfaces and onboard components        
3.5inch RPi LCD (A) 3.2inch touch screen LCD        
PCF8591 AD DA Board 8-bit AD/DA module        
L3G4200D Board Angular rate sensor        
LSM303DLHC Board e-compass        
Mix Board Buzzer, Joystick, Infrared Receiver, Temperature Sensor        
Logic Level Converter 8ch Logic Level Bus Transceiver        
USB WIFI 150M RTL8188CUS USB WIFI        
Micro SD Card 8GB 8GB Miro SD Card, class 10        
USB Camera 0307  USB camera        
Mini Wireless Keyboard  Mini wireless keyboard with touchpad        
USB Hub 4 Port Provides 3 additional USB Port        
HDMI to VGA Convertor For working with VGA monitors        
5V 2A Power Adapter Required while heavy-loaded        
ARPI600 Raspberry Pi to Arduino        
Sensors Pack Various sensors in one pack        

 

Raspberry Pi Model B+ Selection Guide

Package ContentsProducts
ItemDescriptionAcce. APackage AAcce. BPackage BAcce. CPackage CAcce. DPackage D
RPi B+ Raspberry Pi Model B+        
DVK512 Expansion Board, provides expansion interfaces and onboard components        
3.5inch RPi LCD (A) 3.2inch touch screen LCD            
RPi Camera (C) Raspberry Pi camera            
PCF8591 AD DA Board 8-bit AD/DA module        
L3G4200D Board Angular rate sensor        
LSM303DLHC Board e-compass        
Mix Board Buzzer, Joystick, Infrared Receiver, Temperature Sensor            
Logic Level Converter 8ch Logic Level Bus Transceiver            
USB WIFI 150M RTL8188CUS USB WIFI            
Micro SD Card 8GB 8GB Miro SD Card, class 10            
USB Camera 0307  USB camera            
Mini Wireless Keyboard  Mini wireless keyboard with touchpad            
HDMI to VGA Convertor For working with VGA monitors            
5V 2A Power Adapter Required while heavy-loaded            
ARPI600 Raspberry Pi to Arduino            
Sensors Pack Various sensors in one pack            
PCO01047

Também poderá gostar