DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL 
Se tiver alguma dúvida neste produto não hesite em contactar-nos. 
*Atenção: as imagens são meramente ilustrativas.
Overview
This is a general LCD display Module, IPS screen, 1.3inch diagonal, 240x240 HD resolution, with embedded controller, communicating via SPI interface.
Features
	- SPI interface, requires minimum GPIO for controlling
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
	- Driver: ST7789
- Interface: SPI
- Display color: RGB, 65K color
- Resolution: 240x240
- Backlight: LED
- Operating voltage: 3.3V
Interface
	
		
			| SYMBOL | DESCRIPTION | 
		
			| VCC | Power (3.3V input) | 
		
			| GND | Ground | 
		
			| DIN | SPI data input | 
		
			| CLK | SPI clock input | 
		
			| CS | Chip selection, low active | 
		
			| DC | Data/Command selection (high for data, low for command) | 
		
			| RST | Reset, low active | 
		
			| BL | Backlight | 
	
Dimensions

Development Resources
Wiki : www.waveshare.com/wiki/1.3inch_LCD_Module
Selection Guide
	
		
			| Part Number | Type | Color | Resolution | Display Size (mmxmm) | Interfaces | Driver | Dimension (mmxmm) | Pinheader | 
		
			| 0.91inch OLED Module | OLED | White | 128x32 | 22.38x5.58 | I2C | SSD1306 | 36.0x12.5 | PH2.0 connector | 
		
			| 0.95inch RGB OLED (A) | OLED | 65K colorful | 96x64 | 20.14x13.42 | SPI(4-wire SPI) | SSD1331 | 31.7x37.0 | angled/horizontal | 
		
			| 0.95inch RGB OLED (B) | OLED | 65K colorful | 96x64 | 20.14x13.42 | SPI(4-wire SPI) | SSD1331 | 31.7x37.0 | straight/vertical | 
		
			| 0.96inch LCD Module | IPS | 65K colorful | 160x80 | 21.70x10.80 | 4-wire SPI | ST7735S | 32.5x26.0 | PH2.0 connector | 
		
			| 0.96inch OLED (A) | OLED | 1/4 yellow section, 3/4 blue section | 128x64 | 21.7x11.2 | 3-wire SPI, 4-wire SPI, I2C | SSD1306 | 33.0x33.5 | angled/horizontal | 
		
			| 0.96inch OLED (B) | OLED | 1/4 yellow section, 3/4 blue section | 128x64 | 21.7x11.2 | 3-wire SPI, 4-wire SPI, I2C | SSD1306 | 33.0x33.5 | straight/vertical | 
		
			| 1.3inch LCD Module | IPS | 65K colorful | 240x240 | 23.40x23.40 | 4-wire SPI | ST7789 | 45.0x31.0 | PH2.0 connector | 
		
			| 1.3inch OLED (A) | OLED | Blue | 128x64 | 29.42x14.7 | 3-wire SPI, 4-wire SPI, I2C | SH1106 | 40.5x37.5 | angled/horizontal | 
		
			| 1.3inch OLED (B) | OLED | Blue | 128x64 | 29.42x14.7 | 3-wire SPI, 4-wire SPI, I2C | SH1106 | 40.5x37.5 | straight/vertical | 
		
			| 1.5inch OLED Module | OLED | White (16 gray scale) | 128x128 | 26.86x26.86 | 4-wire SPI, I2C | SSD1327 | 44.5x37.0 | PH2.0 connector | 
		
			| 1.5inch RGB OLED Module | OLED | 65K colorful | 128x128 | 26.86x26.86 | 3-wire SPI, 4-wire SPI | SSD1351 | 44.5x37.0 | PH2.0 connector | 
		
			| 1.8inch LCD Module | TFT | 65K colorful | 160x128 | 34.50x28.30 | 4-wire SPI | ST7735S | 56.5x34.0 | PH2.0 connector | 
	
Note: the 0.96inch OLED consists of 1/4 yellow upper section and 3/4 blue lower section, not a regular dual-color display.
 
PACKAGE CONTENT
Weight: 0.019 kg
	- 1.3inch LCD Module x1
- PH2.0 20cm 8Pin x1
1 2
 2