•  Ecrã tátil capacitivo 7'' HDMI LCD 1024x600 IPS
  •  Ecrã tátil capacitivo 7'' HDMI LCD 1024x600 IPS
  •  Ecrã tátil capacitivo 7'' HDMI LCD 1024x600 IPS
  •  Ecrã tátil capacitivo 7'' HDMI LCD 1024x600 IPS
  •  Ecrã tátil capacitivo 7'' HDMI LCD 1024x600 IPS

Ecrã tátil capacitivo 7'' HDMI LCD 1024x600 IPS

:LCD01037
64,90 €
preço com IVA incluído
Quantidade

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

 

Features

  • 1024×600 high resolution
  • Capacitive touch control
  • Supports Raspberry Pi
  • Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
  • Supports BB Black, comes with Angstrom image
  • Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen
  • HDMI interface for displaying, USB interface for touch control
  • Back light control to lower power consumption

For revisions under Rev2.1:

  • For the Raspberry Pi, comes with Raspbian driver (works with your Raspbian directly), and Ubuntu image
  • When work as a computer monitor, touch function is unavailable

Rev2.1 New Features:

  • Upgrade to IPS screen, wider viewing angle, more clear displaying
  • Standard HID protocol, easy to be integrated into your system
  • For the Raspberry Pi, supports Raspbian, Ubuntu, Windows 10 IoT, single touch, and driver free
  • When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free

 

Supported mini PC

mini PC

Driver

Image

Raspberry Pi B

Raspbian

Raspbian

Raspberry Pi A+

Raspbian

Raspbian

Raspberry Pi B+

Raspbian

Raspbian

Raspberry Pi 2 Model B

Raspbian

Raspbian, Ubuntu, Windows 10 IoT

Banana Pi

-

Raspbian, Lubuntu

Banana Pro

-

Raspbian, Lubuntu

BB Black

-

Angstrom

 

Note :
Drivers can be added to your current system to support LCD display and touch control.
Images CAN NOT be used with your current system. They're stand-alone systems which support LCD display and touch control already.

 

External Dimension

  7inch-HDMI-LCD-C-dimension

Development Resources

Wiki : www.waveshare.com/wiki/7inch_HDMI_LCD_(C)

 

FAQ

Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
 
Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. 
 
Which power supply should I use?
It is strongly recommended to use a stand-alone 5V/3A power adapter, because the PC's USB port might doesn't have enough power to support the Pi and LCD.

For more info, please check the wiki page.

WORKING WITH RASPBERRY PI

When working with Raspberry Pi, you should set the resolution of the LCD manually, or else the LCD screen will not work.

1.Turn on the "backlight" switch

2.Connect the HDMI Port of LCD to HDMI Port of Pi

3.Connect USB Port of LCD to USB Port of P4. Download the Raspbian image from Raspberry Pi website.

5.Write the image to a TF card and append the following lines to the config.txt file which locates in the root of your TF card:

max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
hdmi_drive=1

You must make sure that there are no spaces on either side of the equal sign.

6.Save and connect the TF card to your Pi then power up.

Note

1) Make sure you have appended configure lines as above. Or the LCD could not work properly. If the LCD work in abnormal states for long time, it may destroy.

2) There is a potentiometer on the backside of LCD, at your first use, you had better adjust it for best display effect.

 

Selection Guide

Part Number

Resolution

LCD Interface

Touch Panel Interface

Dimension (mm)

How you feel

Touch Panel Type

Feature

3.2inch RPi LCD (B)

320x240

I/O

I/O

As the Pi

★★
(indeed it displays something)

Resistive

Cheap

3.5inch RPi LCD (A)

320x480

I/O

I/O

As the Pi

★★★
(not bad)

Resistive

High cost performance

4inch RPi LCD (A)

320x480

I/O

I/O

95 x 61

★★★☆
(better enough)

Resistive

IPS screen

5inch HDMI LCD

800x480

HDMI

I/O

121 x 78

★★★★
(good)

Resistive

High definition

5inch HDMI LCD (B)

800x480

HDMI

USB

121 x 76

★★★★
(good)

Resistive

High definition, supports various systems

7inch HDMI LCD (B)

800x480

HDMI

USB

165 x 107

★★★★☆
(great)

Capacitive

High definition, supports various systems

7inch HDMI LCD (C)

1024x600

HDMI

USB

165 x 107

★★★★★
(amazing)

Capacitive

IPS screen, Ultra high definition, supports various systems

LCD01037

Também poderá gostar