XH-M452 Controlador de temperatura e humidade
  • XH-M452 Controlador de temperatura e humidade
  • XH-M452 Controlador de temperatura e humidade
  • XH-M452 Controlador de temperatura e humidade
  • XH-M452 Controlador de temperatura e humidade
  • XH-M452 Controlador de temperatura e humidade
  • XH-M452 Controlador de temperatura e humidade
  • XH-M452 Controlador de temperatura e humidade

XH-M452 Controlador de temperatura e humidade

:MRE02003
20,28 €

O Controlador Digital de Temperatura e Humidade XH-M452 é usado para a medição e controle de sistemas de temperatura de alta precisão. Com duas saídas independentes a relé de 10A.

Quantidade
Últimos artigos em stock

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

The XH-M452 Digital Temperature and Humidity 12VDC Controller, is used for the measurement and control of high precision temperature systems. The module runs on a 12VDC supply. The module, also has separate 220VAC 10A Relay outputs for Heater and Humidity Generators (External Fan, and Humidifier).

Applications

  • Hatchery control
  • Equipment cabinets
  • Air conditioning systems
  • Temperature controled protection
  • Refrigerators
  • Freezers
  • Water heaters

Quick Spec

  • Model: XH-M452
  • Input voltage: DC 12V
  • Temperature range: -20~60Celsius
  • Humidity range: 00%-100%RH
  • Detection accuracy: 0.1Celsius 0.1%RH
  • Detection accuracy: 0.1Celsius
  • Sensor length: 100mm
  • Output Type: Relay Output(Switch Output) 10A/250VAC <-> 10A/30VDC
  • Dimensions: 65 X 55 X 28mm

Wiring Diagram

xh

Settings

Temperature Control

  1. Set Start Temperature: Long press ‘Tempearture +’ to set start temperature by key ‘Tempearture +’ and ‘Tempearture -’ and display will flashing.It will save automatically after 5 seconds and then display current actual temperature.
  2. Set Stop Temperature: Long press ‘Tempearture -’ to set stop temperature by key ‘Tempearture +’ and ‘Tempearture -’ and display will flashing.It will save automatically after 5 seconds and then display current actual temperature.

Humidity Control

  1. Set Start Humidity : Long press ‘Humidity+’ to set start humidity by key ‘Humidity+’ and ‘Humidity-’ and display will flashing.It will save automatically after 5 seconds and then display current actual humidity .
  2. Set Stop Humidity : Long press ‘Humidity-’ to set stop humidity by key ‘Humidity+’ and ‘Humidity-’ and display will flashing.It will save automatically after 5 seconds and then display current actual humidity .

Dimensions

13227-51

Shipping List

  • 1 X XH-M452 Thermostat Controller
  • 1 X Temperature Sensor Probe
MRE02003

Também poderá gostar