Módulo Ventoinha DC

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

INTRODUCTION

Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this module. 

This module is commonly used for STEM class.

Connection Diagram

SPECIFICATION

• Working Voltage：3~6V
• Working Temperature：-20~85℃
• Speed (no load)：15000 rpm
• Speed (6V)：8000 rpm
• Current (6V)：40mA
• Stall current (6V)：360mA
• Torque (6V):0.111kg/cm
• Size: 36*27*13 mm(1.42*1.06*0.51")
• Weight: 22g

DOCUMENTS

• Wiki Doc
• Schematic

Sample Code

//Arduino Sample Code for Fan Module
//www.DFRobot.com
//Version 1.0

#define Fan 3    //define driver pins

void setup()
{
  pinMode(Fan,OUTPUT);
  Serial.begin(9600);    //Baudrate: 9600
}                          
void loop() 
{ 
  int value;
  for(value = 0 ; value <= 255; value+=5) 
  {
    analogWrite(Fan, value);   //PWM
    Serial.println(value);    
    delay(30); 
  }  
}