Washable Resin Flashforge 500ml - Grey

: IMP02195
€27.64

Good mechanical strength & rigid-tough balance
Low shrinkage
Excellent performance in detail
Easy clean (just using water)
Good heat-resistance with no crack or deformation (30 min at 100)
Easy painting
Good long-term storage stability
Compatible with most LCD 3D printers

Select the product color:
Quantity
Product available with different options


If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

Specifications

Wavelength: 405nm
Volume: 500 ml
Compatible with Flashforge Foto Series & All LCD 3D Printers with 405nm
Shake evenly before use
Put on gloves while using photopolymer resin to avoid direct contact with hands

Properties
Density (g/ml): 1.13 ~ 1.24
Viscosity (cps, 25℃): 160 ~ 220
Hardness (D): 84 D
Tensile Strength (MPa): 32 Mpa
Elongation @ break(%): 8%
Flexural Modulus (MPa): 2200 Mpa
Flexural Strength (MPa): 58 Mpa

Recommendations

Shake evenly before use
Put on gloves while using photopolymer resin to avoid direct contact with hands
Avoid direct skin contact
Wash with water after touching the resin
Avoid lighting
Unused photopolymer resin needs to be stores in a dark, dry and cool place

 

ce16299437b601afd92f3e21976a7c70.jpg

9978646cbe9e0c9f6efd3988b6d8366f.jpg

4eae9c99ebf9434f7c0888f2d0780334.jpg

3590a8fbf0357c1da880f6496db193af.jpg

bcf11182cb767c8dc8f20f7b621ffa6c.jpg

35b2fce784398c3c448e3c67db2dca2e.jpg

9165e81280a8a1c27ef2e24775d87807.jpg

IMP02195

Related products