ESP32 PLACA DE DESENVOLVIMENTO ESPRESSIF ESP32-WROOM-32 - keyestudio KS0413

:PCO05118
12,50 €
preço com IVA incluído

Esta placa principal keyestudio ESP32 é uma placa de desenvolvimento Mini baseada no módulo ESP-WROOM-32. Para além de ser ideal para conecção via Bluetooth, esta placa conta ainda com pinos de 2,54mm, o que fornece uma maneira fácil de conectar periféricos de acordo com as tuas necessidades.

Se quiseres saber mais sobre este pruduto, consulta aqui a sua Wiki Page.

Quantidade

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

Description:

The processor core of the keyestudio ESP32 board is the ESP32-WROOM-32D module.

The ESP32-WROOM-32 is a universal Wi-Fi+BT+BLE MCU module, with powerful functions; can be used in low power sensor networks. The core of this module is the ESP32-D0WDQ6 chip, which is scalable and adaptive. The two CPU cores can be individually controlled.

The ESP32 integrates a wide range of peripherals including capacitive touch sensor, Hall sensor, low noise amplifiers, SD card and Ethernet interfaces, high speed SDIO/SPI, UART, I2S and I2C, etc.

It also integrates traditional Bluetooth, Bluetooth low energy and Wi-Fi for a wide range of uses.

The ESP32 chip's sleep current is less than 5μA, suitable for battery-powered wearable electronics.

The module supports data rates up to 150 Mbps; antenna output power of 20 dBm for maximum wireless communication.

The ESP32 integrates a wide range of peripherals including capacitive touch sensor, Hall sensor, low noise amplifiers, SD card interfaces, Ethernet interfaces, high speed SDIO/SPI, UART, I2S and I2C, etc.

It also integrates traditional Bluetooth, Bluetooth low energy and Wi-Fi for a wide range of uses.

The ESP32 chip's sleep current is less than 5μA, suitable for battery-powered wearable electronics.

The module supports data rates up to 150 Mbps; antenna output power of 20 dBm for maximum wireless communication.

 

Technical Details

  1. Microcontroller: ESP-WROOM-32 module

  2. USB to Serial Port Chip: CP2102-GMR

  3. Operating Voltage: DC 5V

  4. Operating Current: 80mA (average)

  5. Current Supply: 500mA (Minimum)

  6. Operating Temperature Range: -40℃ ~ +85℃

  7. WiFi mode: Station/SoftAP/SoftAP+Station/P2P

  8. WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps

  9. WiFi frequency range: 2.4 GHz ~ 2.5 GHz

  10. Bluetooth protocol: conform to Bluetooth v4.2 BR/EDR and BLE standards

  11. Dimensions: 55mm*26mm*13mm

  12. Weight: 9.3g

 

Documents:

  1. WIKI page tutorial

0413图片3.png
format,webpformat,webp

 

PCO05118

Também poderá gostar