ESP32 Core board ESP-WROOM-32 - keyestudio KS0413

:PCO05118
€12.50
Tax included

This keyestudio ESP32 core board is a Mini development board based on the ESP-WROOM-32 module.
The board has brought out most I/O ports to pin headers of 2.54mm pitch. These provide an easy way of connecting peripherals according to your own needs.
When it comes to developing and debugging with the development board, the both side standard pin headers can make your operation more simple and handy.

If you want to learn more about this product, you can check its Wiki Page.

Quantity

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

Description:

The processor core of the keyestudio ESP32 board is the ESP32-WROOM-32D module.

The ESP32-WROOM-32 is a universal Wi-Fi+BT+BLE MCU module, with powerful functions; can be used in low power sensor networks. The core of this module is the ESP32-D0WDQ6 chip, which is scalable and adaptive. The two CPU cores can be individually controlled.

The ESP32 integrates a wide range of peripherals including capacitive touch sensor, Hall sensor, low noise amplifiers, SD card and Ethernet interfaces, high speed SDIO/SPI, UART, I2S and I2C, etc.

It also integrates traditional Bluetooth, Bluetooth low energy and Wi-Fi for a wide range of uses.

The ESP32 chip's sleep current is less than 5μA, suitable for battery-powered wearable electronics.

The module supports data rates up to 150 Mbps; antenna output power of 20 dBm for maximum wireless communication.

The ESP32 integrates a wide range of peripherals including capacitive touch sensor, Hall sensor, low noise amplifiers, SD card interfaces, Ethernet interfaces, high speed SDIO/SPI, UART, I2S and I2C, etc.

It also integrates traditional Bluetooth, Bluetooth low energy and Wi-Fi for a wide range of uses.

The ESP32 chip's sleep current is less than 5μA, suitable for battery-powered wearable electronics.

The module supports data rates up to 150 Mbps; antenna output power of 20 dBm for maximum wireless communication.

 

Technical Details

  1. Microcontroller: ESP-WROOM-32 module

  2. USB to Serial Port Chip: CP2102-GMR

  3. Operating Voltage: DC 5V

  4. Operating Current: 80mA (average)

  5. Current Supply: 500mA (Minimum)

  6. Operating Temperature Range: -40℃ ~ +85℃

  7. WiFi mode: Station/SoftAP/SoftAP+Station/P2P

  8. WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps

  9. WiFi frequency range: 2.4 GHz ~ 2.5 GHz

  10. Bluetooth protocol: conform to Bluetooth v4.2 BR/EDR and BLE standards

  11. Dimensions: 55mm*26mm*13mm

  12. Weight: 9.3g

 

Documents:

  1. WIKI page tutorial

0413图片3.png
format,webpformat,webp

 

PCO05118

You might also like