- New

Power Over Ethernet HAT (Type B) For Raspberry Pi 3B+/4B, 802.3af Power-Sourcing Equipment Required
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
POE HAT FOR RASPBERRY PI
Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant
(Any Backward-Compatible Future Versions Will Be Supported As Well)
OLED for real-time monitoring temperature, IP, and fan status
The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Features At A Glance
Specifications
POE POWER INPUT | 37V ~ 57V DC in | OLED SIZE | 0.91" |
---|---|---|---|
POE POWER OUTPUT | 5V 2.5A DC out | OLED PIXELS | 128×32 |
NETWORK STANDARD | 802.3af PoE | OLED DRIVER | SSD1306 |
DIMENSIONS | 56.5 × 65mm | OLED DISPLAY COLOR | white |
For Use With Raspberry Pi 3B+/4B
Standard Raspberry Pi 40PIN GPIO Stackable Header, Allows Connecting Other HATs
Power Over Ethernet
Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable
* proper 802.3af-compliant power sourcing equipment is required
0.91" OLED Display
128 × 32 Pixels, I2C-Bus Controlled
Monitoring Processor Temperature, IP Address, Fan Status In Real-Time
Cooling Fan
Allows Auto Running On Powerup OR Programmable Control, Configured By Switch
Automatically Turn On/Off Depending On The Raspberry Pi Processor Temperature
Onboard PCF8574 Chip
PCF8574 IO Expander For I2C Bus, Providing 8 IO Pins, Of Which P0 For Fan Control
And Extra Spare Pins On Solder Pads (P1-P7, INT)
Pinout Definition
Outline Dimensions
Resources & Services
WIKI: www.waveshare.com/wiki/PoE_HAT_(B)
* Resources for different products may vary, please check the wiki page to confirm the actually provided resources.
Weight: 0.052 kg
12
You might also like