• New

RGB LED STRIP 5V, WS2812B, 30 LED/M, BLACK PCB IP67 (NEOPIXEL) - 5 METER

:CEL11075
€38.94

Reel 5 meters RGB LED Strip WS2812B 5V with 30 LEDs with IP67 Black Flexible PCB.

Note: The 5 meter coil comes with two connectors, if more connectors are needed, they are available here in the store in pairs.

Quantity

Specifications:

  • Input Voltage: DC5V
  • Power: 18Watt/meter
  • LED Resource: WS2812B Led(5050 SMD RGB LED With Built-in Improved Version Of WS2811 IC)
  • LED: Each Led is Separately Controlled
  • IC Type: Improved Version WS2812 IC(Built Inside The 5050SMD RGB LED)
  • Pixels: 30/Meters
  • Grey Scale: 256
  • Bits/Color: 8-Bits/Color
  • FPC Width: 10mm
  • FPC color: Black
  • Protection Rate: IP67
  • Colors: Full Color RGB, Dream Color Changing
  • Cuttable: Every LED is Cuttable
  • Reel: 5 meters

IP67 - 60 Leds - Black.png

IP67 - 60 Leds.png

30 leds - medidas.png

esquema ligação fita WS.png

Arduino

Esquema ligação arduino.png

For programming the Arduino, we will use the FastLED library.

This is an excellent and well documented library which enables easy control of the WS2812B LEDs.

Sample Code

#include <FastLED.h>
#define LED_PIN     7
#define NUM_LEDS    20

CRGB leds[NUM_LEDS];

void setup() {

  FastLED.addLeds<WS2812, LED_PIN, GRB>(leds, NUM_LEDS);
}

void loop() {
  leds[0] = CRGB(255, 0, 0);
  FastLED.show();
  delay(500);
  leds[1] = CRGB(0, 255, 0);
  FastLED.show();
  delay(500);
  leds[2] = CRGB(0, 0, 255);
  FastLED.show();
  delay(500);
  leds[5] = CRGB(150, 0, 255);
  FastLED.show();
  delay(500);
  leds[9] = CRGB(255, 200, 20);
  FastLED.show();
  delay(500);
  leds[14] = CRGB(85, 60, 180);
  FastLED.show();
  delay(500);
  leds[19] = CRGB(50, 255, 20);
  FastLED.show();
  delay(500);
CEL11075

You might also like