• New

RGB LED STRIP 5V, WS2812B, 60 LED/M, WHITE PCB IP67 (NEOPIXEL) - 5 METER

:CEL11074
€38.94

Reel 5 meters RGB LED Strip WS2812B 5V with 60 LEDs with IP67 White Flexible PCB.

Note: The 5 meter coil comes with two connectors, if more connectors are needed, they are available here in the store in pairs.

Quantity
Out-of-Stock


Specifications:

  • Input Voltage: DC5V
  • Power: 18Watt/meter
  • LED Resource: WS2812B Led(5050 SMD RGB LED With Built-in Improved Version Of WS2811 IC)
  • LED: Each Led is Separately Controlled
  • IC Type: Improved Version WS2812 IC(Built Inside The 5050SMD RGB LED)
  • Pixels: 60/Meters
  • Grey Scale: 256
  • Bits/Color: 8-Bits/Color
  • FPC Width: 10mm
  • FPC color: White
  • Protection Rate: IP67
  • Colors: Full Color RGB, Dream Color Changing
  • Cuttable: Every LED is Cuttable
  • Reel: 5 meters

IP67 - 60 Leds - Black.png

IP67 - 60 Leds.png

Arduino

Esquema ligação arduino.png

For programming the Arduino, we will use the FastLED library.

This is an excellent and well documented library which enables easy control of the WS2812B LEDs.

Sample Code

#include <FastLED.h>
#define LED_PIN     7
#define NUM_LEDS    20

CRGB leds[NUM_LEDS];

void setup() {

  FastLED.addLeds<WS2812, LED_PIN, GRB>(leds, NUM_LEDS);
}

void loop() {
  leds[0] = CRGB(255, 0, 0);
  FastLED.show();
  delay(500);
  leds[1] = CRGB(0, 255, 0);
  FastLED.show();
  delay(500);
  leds[2] = CRGB(0, 0, 255);
  FastLED.show();
  delay(500);
  leds[5] = CRGB(150, 0, 255);
  FastLED.show();
  delay(500);
  leds[9] = CRGB(255, 200, 20);
  FastLED.show();
  delay(500);
  leds[14] = CRGB(85, 60, 180);
  FastLED.show();
  delay(500);
  leds[19] = CRGB(50, 255, 20);
  FastLED.show();
  delay(500);
CEL11074

You might also like