XH-M452 Temperature and Humidity controller
  • XH-M452 Temperature and Humidity controller
  • XH-M452 Temperature and Humidity controller
  • XH-M452 Temperature and Humidity controller
  • XH-M452 Temperature and Humidity controller
  • XH-M452 Temperature and Humidity controller
  • XH-M452 Temperature and Humidity controller
  • XH-M452 Temperature and Humidity controller

XH-M452 Temperature and Humidity controller

:MRE02003
€20.28

The XH-M452 Digital Temperature and Humidity 12VDC Controller, is used for the measurement and control of high precision temperature systems.

Quantity
Last items in stock

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

The XH-M452 Digital Temperature and Humidity 12VDC Controller, is used for the measurement and control of high precision temperature systems. The module runs on a 12VDC supply. The module, also has separate 220VAC 10A Relay outputs for Heater and Humidity Generators (External Fan, and Humidifier).

Applications

  • Hatchery control
  • Equipment cabinets
  • Air conditioning systems
  • Temperature controled protection
  • Refrigerators
  • Freezers
  • Water heaters

Quick Spec

  • Model: XH-M452
  • Input voltage: DC 12V
  • Temperature range: -20~60Celsius
  • Humidity range: 00%-100%RH
  • Detection accuracy: 0.1Celsius 0.1%RH
  • Detection accuracy: 0.1Celsius
  • Sensor length: 100mm
  • Output Type: Relay Output(Switch Output) 10A/250VAC <-> 10A/30VDC
  • Dimensions: 65 X 55 X 28mm

Wiring Diagram

xh

Settings

Temperature Control

  1. Set Start Temperature: Long press ‘Tempearture +’ to set start temperature by key ‘Tempearture +’ and ‘Tempearture -’ and display will flashing.It will save automatically after 5 seconds and then display current actual temperature.
  2. Set Stop Temperature: Long press ‘Tempearture -’ to set stop temperature by key ‘Tempearture +’ and ‘Tempearture -’ and display will flashing.It will save automatically after 5 seconds and then display current actual temperature.

Humidity Control

  1. Set Start Humidity : Long press ‘Humidity+’ to set start humidity by key ‘Humidity+’ and ‘Humidity-’ and display will flashing.It will save automatically after 5 seconds and then display current actual humidity .
  2. Set Stop Humidity : Long press ‘Humidity-’ to set stop humidity by key ‘Humidity+’ and ‘Humidity-’ and display will flashing.It will save automatically after 5 seconds and then display current actual humidity .

Dimensions

13227-51

Shipping List

  • 1 X XH-M452 Thermostat Controller
  • 1 X Temperature Sensor Probe
MRE02003

You might also like