- New
The Grove - CO2 & Temperature & Humidity Sensor - SCD41 is a small but powerful module which made by Sensirion. It is a multiple function sensor which can measure temperature, pressure, humidity and CO2 at the same time. It is based on the SCD41 module and you can use this sensor in your GPS, IoT devices or other device which needs those four parameters.
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
The Grove - SCD41 is a compact yet powerful 3-in-1 environmental sensor for CO2, Humidity and Temperature measurement. Based on Sensirion SCD41, the photoacoustic NDIR sensor technology enables high accuracy and wide measurement range. Its miniture size, large supply voltage, high robustness and adjustable power consumption allow it to perfectly integrate into a variety of environmental monitoring applications such as Smart Ventilation System.
Photoacoustic NDIR sensor technology PASens®:Embedded Sensirion SCD41 enables real-time CO2 detection with a high accuracy of up to ±(40 ppm + 5 %) and a wide measurement range of 400 to 5,000 ppm
3-in-1 environmental sensor: Integrated humidity and temperature sensor comes with algorithm that enables superior on-chip signal compensation and addition RH and T outputs
Compact size: the smallest form factor of 10.1 x 10.1 x 6.5 mm3 allows space-effective integration
Fit for various applications base on uses' need: Supports large supply voltage of 2.4 V – 5.5 V, robustness towards external stresses and the adjustable power consumption down to < 0.4 mA avg
Air Purifier
Environmental Monitoring
Plant Environmental Monitoring System
Arduino weather station
|
Parameter |
Value |
|---|---|
|
Input voltage |
3.3V / 5V |
|
Operating range |
-10~+60℃; 0-100% r.H.; 400-5,000 ppm |
|
I2C Address |
0x62 |
|
Interface |
I2C |
Pin Map

Related products
The Grove - CO2 & Temperature & Humidity Sensor - SCD41 is a small but powerful module which made by Sensirion. It is a multiple function sensor which can measure temperature, pressure, humidity and CO2 at the same time. It is based on the SCD41 module and you can use this sensor in your GPS, IoT devices or other device which needs those four parameters.