FOCA USB-Xbee Converter
  • FOCA USB-Xbee Converter
  • FOCA USB-Xbee Converter
  • FOCA USB-Xbee Converter
  • FOCA USB-Xbee Converter
  • FOCA USB-Xbee Converter

FOCA USB-Xbee Converter

: CNV01013
€10.08

DISCONTINUED

 

Foca V2.0 is a compact USB to serial adapter with BEE sockets. With integrated FT232 IC, It can be used for programming, communicating with MCU applications or connect PC to wireless applications via the BEE modules.

Quantity
Out-of-Stock


If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

Foca 2.x is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can be used for programming or communicating with MCU applications. On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules.

Foca V2.0 is a USB to serial UART board with XBee interface socket. It’s the essential tools for establishing communication between PC and mostly MCU or use XBee. Especially, it’s the optimum tool for the board which basic Arduino but without USB interface, like Arduino Mini, Sniffer Nano, Colorduino, etc

It is an excelent compact converter to use with xbee applications or other bee modules, using a USB cable to give you more connection flexibility. So, you can conect a xbee module directly to your PC. Instead bee modules, you also can directly connect all serial devices through on board headers cause mainly it is a serial to usb converter.

A usb cable (not included) is needed to conect FOCA to PC.

ATENÇÃO: ao utilizar o Xbee no conversor FOCA, é necessário que o seletor de tensão existente no FOCA esteja selecionado em 3,3V e não em 5V, uma vez que o Xbee tem uma tensão de funcionamento de 3,3V. Caso utilize o Xbee com o FOCA estando o seletor de tensão selecionado em 5V, o Xbee irá queimar!

 
Features

  • Reset button for BEE modules
  • Single chip USB to asynchronous serial data transfer interface. Tiny volume
  • Entire USB protocol handled on the chip
  • No firmware programming require
  • 5V Single Supply Operation and compatible with 3.3V/5V operation voltage (switch button).
  • USB 2.0 Full Speed compatible
  • Compatible with Xbee
  • ISP mode available
  • BitBang mode ready

 

Application

  • USB Serial adapter to communicate with TTL/CMOS level Serial devices
  • Programmer for Arduino and compatible boards
  • USB Adapter of BEE modules for PC wireless function

 

Specification

Module Type Adaptor
Weight 10.00g
Model IM120525005
Board Size 4.7 x 2.6 x 0.87cm
Version 2.2
Operation Level
  • Digital 3.3V
  • Digital 5V
Power Supply USB 5V

 

Documents

Datasheet

Schematic

CNV01013

Related products