Raspberry Pi 3 Model B+
- DISCONTINUED
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare.
Note: e-Paper and Raspberry Pi are NOT included.
Supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32
can be used to drive most SPI interface e-Paper from Waveshare

| operating voltage | 3.3V/5V |
|---|---|
| interface | 3-wire SPI, 4-wire SPI |
| outline dimensions | 65.0 × 30.2mm |
| Mounting hole size | 3.0mm |
Expanding display interface via FFC cable, for easy connecting to the e-paper

Connecting with 5.83inch e-Paper
Connecting with Raspberry Pi Zero
and 5.83inch e-Paper (B)
Connecting with Raspberry Pi Zero
and 7.5inch e-Paper
Connecting with Raspberry Pi 4B
and 7.5inch e-Paper (B)
for reference only, the Raspberry Pi boards and e-paper screens are NOT included
for use with other controller boards like Raspberry Pi/Jetson Nano/STM32/Arduino
| VCC | 3.3V/5V |
|---|---|
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data / Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output |
| PWR | Power on/off control |
for reference only, the e-paper screen is NOT included

Related products
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare.
Note: e-Paper and Raspberry Pi are NOT included.