-
MenuBack
-
Menu
-
Arduino & Raspberry & Micro:bit
-
-
-
-
-
Controller Boards
-
-
-
Batteries
-
Components & TOOLS
-
-
Workshop and Equipment
- Pliers and Wrenches
- Breadboards
- Drills and Milling Cutters
- Storage Boxes
- Electronics boxes
- Bench Equipment
- Tool Cases & Kits
- Heat shrink sleeve
- Multimeters
- Oscilloscope
- Screws and Spacers
- PCB Copper
- IC Programmers
- Personal Protection
- Protoboards
- Soldering
- Spray and Conductive Paint
- DIN Rail Supports
- Others
-
-
-
-
-
Sound and Audio
-
-
-
-
Comunication & Smart Home
-
-
LCD + Matrix + Keypad
-
-
Power Sources and Renewable Energy
-
-
-
RENEWABLE ENERGY
-
-
-
3D Printing & DRONES
-
-
Motors and Relays
-
-
ROBOTICS
-
-
Sensors
-
-
- Catalog
- New Products
- On Sale
- Tutorials
- Contact
Battery charger 6V 12V and 12.8Vdc 0.8Amax
This charger is specially designed for use on car batteries, motorcycle batteries, and all kinds of lead batteries.
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
Description
Multistage intelligent charger 6 V / 12 V, 0.8 A is designed for cars, motorcycles, backup batteries. Charges lead batteries 1.2V ~ 30 Ah WET (acid), MF (maintenance free), backup batteries VRLA, AGM, GEL and 12.8 V LiFePO4 batteries 2 ~ 15 Ah. The charger is used for the maintenance mode of batteries of all sizes. In addition to charging, it also keeps the battery permanently charged. It has memory, in case of power failure it remembers charging mode, it continues after power recovery. The advantage is the possibility of permanent connection to the rechargeable battery - maintenance mode.
Product parameters:
- designed for: cars, motorcycles, backup batteries, lead batteries WET (acid), MF (maintenance free), VRLA, AGM and GEL and 12.8V LiFePO4
- controlled by internal MCU, diagnoses the connected battery and automatically charges and maintains it
- charging: 6/12 V: 1.2 Ah ~ 30 Ah; 12.8V LiFePO4: 2 Ah ~ 15 Ah
- charging steps: 7, fully automated charging cycle (automatic charging termination, maintenance mode)
- charging cable: 1.8 m is terminated with terminals
- protection against short circuit, overload and polarity reversal
- charging indication: LED
Technical parameters:
- input voltage: 220–240 V AC, 50 Hz / 300 mA
- output current: 0.8 A (max)
- charging voltage: 7.3 V / 12.8 V / 14.4 V DC
- charging:
batteries 6V / 12V (1.2 ~ 30Ah)
12.8V LiFePO4 batteries (2 ~ 15Ah)
- protection: IP20 (IP65 charger cover)
- dimensions: 116 x 69 x 72mm
- weight: 255 g
- packaging: 1 pc paper box / 20 pcs carton
Parameters and specifications
Charging voltage: 12V, 6V
Max. charging current: 0,8 A
Related products