EL PANEL BLUE 10x10cm
  • EL PANEL BLUE 10x10cm
  • EL PANEL BLUE 10x10cm
  • EL PANEL BLUE 10x10cm
  • EL PANEL BLUE 10x10cm

EL PANEL BLUE 10x10cm

:CEL09009
€14.31

EL-Panel - 10x01cm (can be cutted!!). It is attached to a 20cm cable which is terminated with a JST PH connector.

Quantity
Last items in stock

Who doesn't love the soft glow of electroluminescence? This EL Panel is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It's a lot like the ever-popular EL wire except, well, it's a ribbon.

These can be driven with any of the EL inverters and sequencers that we carry and come in a variety of bright colors (check below for other colors). This particular ribbon is 1 meter long, 15mm wide and illuminates red. It is attached to a 20cm cable which is terminated with a JST 2mm connector.

 

Check our EL-TAPE compatible inverters:

  • EL-INVERSTER 12V (w/ JST 2mm conector)
  •  EL-INVERSTER 3V   (w/ JST 2mm conector)
  • EL-INVERSTER BATTERY PACK (2x AA) (w/ JST 2mm conector)  

 

Note: These panels can be cut to any shape! Regular scissors work fine to cut this EL panel but after you've cut the panel you should seal the exposed edges with some tape or epoxy to avoid shorting the panel or shocking yourself.

 

Features

  • Tape dimensions: 1m long, 15mm wide
  •  20cm cable attached
  • Use JST 2mm conector!


Documents

 

Images:

el_tape

 

 

Videos

 

 

CEL09009