

Lithium-ion Polymer Battery 3.7V 1600mAh

This charger is made for single cell Li-ion batteries which are charged with 4.2 V. The TP4056 chipset is a constant-voltage/constant-current charger.
The on-board DW01 battery protection IC disconnects the battery on overcurrent, overcharge and on over discharge.
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
Li-Ion Charging Module TP4056 with Battery Protection, 1A, Mini-USB
This charger is made for single cell Li-ion batteries which are charged with 4.2 V. The TP4056 chipset is a constant-voltage/constant-current charger.
The on-board DW01 battery protection IC disconnects the battery on overcurrent, overcharge and on overdischarge.
A full charge is detected as soon as the current drops below 100 mA. The charging is automatically terminated by the TP4056.
Specification:
Input Voltage: | up to 8 V max. |
Charging Current: | ca. 1 A |
Display: | 2 LEDs |
Connection: | Connection Pads for Input/Output Voltages and Battery, Mini-USB |
Dimensions: | 26.3 mm x 17.1 mm x 5.6 mm |
You might also like
This charger is made for single cell Li-ion batteries which are charged with 4.2 V. The TP4056 chipset is a constant-voltage/constant-current charger.
The on-board DW01 battery protection IC disconnects the battery on overcurrent, overcharge and on over discharge.