• DISCONTINUED
Grove - Multichannel Gas Sensor
  • Grove - Multichannel Gas Sensor
  • Grove - Multichannel Gas Sensor
  • Grove - Multichannel Gas Sensor

Grove - Multichannel Gas Sensor

:SEN08016
€48.90
Tax included

Grove – Multichannel Gas sensor is a environment detecting sensor with a built in MiCS-6814 which can detect many unhealthful gases, and three gases can be measured simultaneously due to its three channels, so it can help you to monitor the concentration which more than one gas.

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

 

This sensor is belong to Grove system, and you can plug it onto the Base shield and work with Arduino directly without any jumper wires. The interface of it is I2C, so plug it onto the I2C port of Base shield, then you can start to work it.

 

Features:

  • Three fully independent sensing elements on one package
  • Built with ATmega168PA
  • I2C interface with programmable address
  • Heating power can be shut down for low power
  • Detectable gases:Carbon monoxide (CO) , Nitrogen dioxide (NO2) , Hydrogen (H2) , Ammonia (NH3) , Methane (CH4) , etc.

Specification:
  • Voltage: 3.1~ 5.25V
  • Ripple(@Max Power):80~100mV
  • Max Heating Power: 88mW
  • Max Power: 150mW
  • ADC Precision : 10Bits
  • I2C Rate: 100kHz
  • VIL(@I2C): -0.5~0.99V
  • VIH(@I2C): 2.31~5.2V

Part List: 
  • 1 x Grove – Multichannel Gas Sensor
  • 1 x 26AWG Grove Cable

Documents

 

Please visit our wiki page for more info about this product.

SEN08016

You might also like