LoRa Radio Node v1.0 based on ATmega328P and RFM98 433Mhz with 14500 Battery socket

:ARD02093
€20.75
Tax included
This LoRa Radio Node v1.0 based on the ATmega328P and RFM98 433Mhz radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which use the Arduino pro mini 8Mhz 3.3V bootloader, which can be used like an Arduino pro mini. This chip has 32K of flash and 2K of RAM.
On board with a 3.7Vdc 14500 battery holder, so it can be used anywhere you like. In this LoRa Radio Node, we break out 2 i2c ports, 2 analog port (A0 A1) and 2 digital port (D3 D4) with 4 pin and 3 pin shell kk type connector.
Quantity
Last items in stock

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

LoRa Radio Node v1.0    Sx1278 LoRa 433Mhz RFM98 With Arduino ATmega328P and uFL Antenna
 
Description:
This LoRa Radio Node v1.0 based on the ATmega328P and RFM98 433Mhz radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which use the Arduino pro mini 8Mhz 3.3V bootloader, which can be used like an Arduino pro mini. This chip has 32K of flash and 2K of RAM.
On board with a 3.7Vdc 14500 battery holder, so it can be used anywhere you like. In this LoRa Radio Node, we break out 2 i2c ports, 2 analog port (A0 A1) and 2 digital port (D3 D4) with 4 pin and 3 pin shell kk type connector.
 
Feature:
  • Power supply: 3.7V 14500 Lipo battery Or 3.7~12Vdc power (VCC GND: 2PIN shell kk type connector.)
  • Size: 40mm x 60mm
  • ATmega328P @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • Hardware Serial, hardware I2C, hardware SPI support
  • 1 x PWM pins: D3
  • 2 x analog inputs: A0 A1
  • Pin #13 BLUE LED for general purpose blinking
  • 2 mounting holes
  • Reset button
 
This LoRa Radio Node uses the extra space left over to add an RFM98 LoRa 433 MHz radio module. These radios are not good for transmitting audio or video, but they do work quite well for small data packet transmission when you need more range than 2.4 GHz (BT, BLE, WiFi, ZigBee).
  • SX1278 LoRa® based module with SPI interface
  • Packet radio with ready-to-go Arduino libraries
  • Uses the amateur or license-free ISM band: ITU "Europe" license-free ISM (with amateur band limitations)
  • +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
  • 300uA during full sleep, ~120mA peak during +20dBm transmit, ~40mA during active radio listening 
  • uFL connector

 

Package Content:

  • 1x LoRa + ATmega328P Board with 14500 Battery Holder
  • 1x LoRa 433MHz Antenna
 
ARD02093

You might also like