Clock module - TM1637


Clock Module for Arduino / Funduino - TM1637
- Voltage 3.3v or 5v
- Display with segments red color



If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

TM1637 7 segment display example

A few of the code examples and projects on this site use modules containing the Tm1638 driver chip, I was interested in this one which is the TM1637 which appears to be a more basic version which can only control a display, the other one can also control LEDs, buttons and two displays at the same time.

This is a common anode 4-digit tube display module which uses the TM1637 driver chip; Only 2 connections are required to control the 4-digit 8-segment displays

Here is the module


Features of the module

  • Display common anode for the four red LED
  • Powered supply by 3.3V/5V
  • Four common anode tube display module is driven by IC TM1637
  • Can be used for Arduino devices, two signal lines can make the MCU control 4 8 digital tube. Digital tube 8 segment is adjustable

Here is how to hook the module up

ARduino and TM1637_bb


Code Example

There is a library for this IC, you can get it from , as usual there is a built in example but here is a simple sketch


#include <TM1637Display.h>
const int CLK = 3; //Set the CLK pin connection to the display
const int DIO = 2; //Set the DIO pin connection to the display
int numCounter = 0;
TM1637Display display(CLK, DIO); //set up the 4-Digit Display.
void setup()
display.setBrightness(0x0a); //set the diplay to maximum brightness
void loop()
for(numCounter = 0; numCounter < 1000; numCounter++) //Iterate numCounter
display.showNumberDec(numCounter); //Display the numCounter value;

You might also like