• Adafruit NeoPixel Digital RGB LED Strip - Black 60 LED - BLACK

RGB LED STRIP 5V, WS2812B, 60 LED/M, BLACK PCB IP67 (NEOPIXEL) - METER

:CEL11013
€15.95
Tax included

WS2812B 5V RGB LED strip with 60 LEDs with IP67 Black Flexible PCB.

Nota: These tapes are sold to the subway! If you want to buy 5 meters we have the option of purchasing a coil with two connectors. This tape is purchased at the subway and you receive a single tape, it will be cut from a reel that may or may not have a connector. These connectors are available here in the store in pairs.

Quantity

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

Specifications:

  • Input Voltage: DC5V
  • Power: 18Watt/meter
  • LED Resource: WS2812B Led(5050 SMD RGB LED With Built-in Improved Version Of WS2811 IC)
  • LED: Each Led is Separately Controlled
  • IC Type: Improved Version WS2812 IC(Built Inside The 5050SMD RGB LED)
  • Pixels: 60/Meters
  • Grey Scale: 256
  • Bits/Color: 8-Bits/Color
  • FPC Width: 10mm
  • FPC color: Black
  • Protection Rate: IP67
  • Colors: Full Color RGB, Dream Color Changing
  • Cuttable: Every LED is Cuttable

IP67 - 60 Leds - Black.png

IP67 - 60 Leds.png

esquema ligação fita WS.png

Arduino

Esquema ligação arduino.png

For programming the Arduino, we will use the FastLED library.

This is an excellent and well documented library which enables easy control of the WS2812B LEDs.

Sample Code

#include <FastLED.h>
#define LED_PIN     7
#define NUM_LEDS    20

CRGB leds[NUM_LEDS];

void setup() {

  FastLED.addLeds<WS2812, LED_PIN, GRB>(leds, NUM_LEDS);
}

void loop() {
  leds[0] = CRGB(255, 0, 0);
  FastLED.show();
  delay(500);
  leds[1] = CRGB(0, 255, 0);
  FastLED.show();
  delay(500);
  leds[2] = CRGB(0, 0, 255);
  FastLED.show();
  delay(500);
  leds[5] = CRGB(150, 0, 255);
  FastLED.show();
  delay(500);
  leds[9] = CRGB(255, 200, 20);
  FastLED.show();
  delay(500);
  leds[14] = CRGB(85, 60, 180);
  FastLED.show();
  delay(500);
  leds[19] = CRGB(50, 255, 20);
  FastLED.show();
  delay(500);
CEL11013

You might also like