240×320, General 2.4inch LCD Display Module, 65K RGB

:LCD01147
€13.80
Tax included

2.4inch LCD Display Module, 65K RGB Colors, 240×320 Resolution, SPI Interface

If you want to know more about this product, please check the Wiki Page.

Quantity
Out-of-Stock


If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

2.4" LCD DISPLAY MODULE

Embedded ILI9341 Driver, Using SPI Bus

Comes with examples for Raspberry Pi, Arduino, STM32, etc.

 2.4inch-LCD-Module-details-1.jpg

 

Features At A Glance

  1. 240×320 resolution, 65K RGB colors, clear and colorful displaying effect

  2. SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32

  3. Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

 

Specifications

OPERATING VOLTAGE 3.3V/5V RESOLUTION 240 × 320 pixels
COMMUNICATION INTERFACE 4-wire SPI DISPLAY SIZE 36.72 × 48.96mm
DISPLAY PANEL TFT PIXEL SIZE 0.153 × 0.153mm
DRIVER ILI9341 DIMENSIONS 70.50 × 43.30mm
 

Controlled Via SPI Bus

Supports Controller Boards Like Raspberry Pi/Arduino/STM32

2.4inch-LCD-Module-details-3.jpg
VCC Power (3.3V/5V input)
GND Ground
DIN SPI data input
CLK SPI clock input
CS Chip selection, low active
DC Data/Command selection (high for data, low for command)
RST Reset, low active
BL Backlight
 

Hardware Connection

Connecting With Raspberry Pi

2.4inch-LCD-Module-details-5.jpg

 

2.4inch-LCD-Module-details-7.jpg
 
2.4inch-LCD-Module-details-9.jpg
 
2.4inch-LCD-Module-details-size.jpg
 

Resources & Services

res_banner.png

Wiki: 2.4inch_LCD_Module

 

 

Package Content

Weight: 0.03 kg

  1. 2.4inch LCD Module x1
  2. PH2.0 8PIN 20cm cable x1
  1. 2.4inch-LCD-Module-3_220.jpg2PH2.0-wire-20cm-8PIN_93.jpg
LCD01147

You might also like