ESP-12E NodeMcu Lua WiFi Development Board

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

NodeMcu Lua WiFi Development Board base on ESP-12E, a low cost wifi development board for you to DIY with NodeMCU platform.

Chip:CP2102; CP210x USB to UART Bridge VCP Drivers: https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
Official Website: http://www.nodemcu.com/index_en.html

Features

• Driver USB: CP2102
• NodeMcu Lua ESP-12E WIFI Development Board
• Wireless 802.11 b/g/n standard
• Support STA / AP / STA + AP three operating modes
• Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)
• D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
• AD0: 1 channel ADC
• Input: 4.5V ~ 9V (10VMAX), USB-powered
• Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
• Transfer rate:110-460800bps
• Support UART / GPIO data communication interface
• Remote firmware upgrade (OTA)
• Support Smart Link Smart Networking
• Working temperature: -40 ℃ ~ + 125 ℃
• Drive Type: Dual high-power H-bridge driver

Useful Links:

Quick-Start-to-Nodemcu-ESP8266-on-Arduino-IDE