Módulo 4 Relés 12V Modbus RTU RS485

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

Relay voltage: power supply 12V.

Relay communication: Multi-unit network 485 communication, based on MODBUS-RTU protocol, the default communication address is 1, users can modify the address by instructions

IN1-IN4 are connected to the switch. The switch status is read through 485, not through the input control relay output.

Note: IN1-IN4 cannot be connected to 230Vac (some buyers will make this mistake)

The wiring is as follows:

IN1-GND (default is high level, low level after the switch is turned on) The computer sends instructions to read the switch status.

IN2-GND (default is high level, low level after the switch is turned on) The computer sends instructions to read the switch status.

IN3-GND (default is high level, low level after the switch is turned on) the computer sends instructions to read the switch status.

IN4-GND (default is high level, low level after the switch is turned on) The computer sends instructions to read the switch status.

Command function:

1. Set the address to 

2. Read the address 

3. Read the software version 

4. Read the hardware version

MODBUS-RTU communication instruction:

Function code: 05 is the relay output [control relay on/off]

Function code: 06 is stored data [user-defined storage data, user-defined data, address number, set by the user. Generally useless]

/**********************************************************************/

Modbus RTU instruction

Baud rate: 9600 8 NONE 1

Send in hexadecimal

Hexadecimal reception

Steps: 

1. The software sets the communication baud rate

2. Set the address (device address used for communication)

The instruction with address 1 set by default

/************************************************* ******************/

Set the address as: 01

Send: 00 06 40 00 00 01 5c 1b

Return: 01 06 00 00 00 01 48 0A

Set the address as: 02

Send: 00 06 40 00 00 02 1c 1a

Return: 02 06 00 00 00 02 08 38

Read address

00 03 40 00 00 01 90 1b

/************************************************* ******************/

Read software version

Send: 00 03 00 02 00 01 24 1b //【Sun】

Return: 01 03 02 10 00 B5 84 //No. 10

Send: 00 03 00 04 00 01 c4 1a //[month] Broadcast reading (only one device can be connected, practical for all addresses, convenient for testing)

Return: 01 03 02 4D 61 4C FC //4D[M] 61[A] MAR[March]

Send: 00 03 00 08 00 01 04 19 //【year】 Broadcast reading (only one device can be connected, practical for all addresses, convenient for testing)

Returns: 01 03 02 20 18 A1 8E //20 18 = 2018

Send: 00 03 00 10 00 01 84 1e //[Hour, Minute] //Broadcast reading (only one device can be connected, practical for all addresses, convenient for testing)

Return: 01 03 02 21 26 21 CE //21:26

Read hardware version (PCB version)

Send: 00 03 00 20 00 01 84 11 //Broadcast reading (only one device can be connected, practical for all addresses, convenient for testing)

Return: 01 03 02 00 6A 38 6B //6A = 106 =V1.06

Send: 01 03 00 20 00 01 85 c0

Return: 01 03 02 00 6A 38 6B //6A = 106 =V1.06

/************************************************* ******************/

[Address 1]

//--------------------------------------------

Relay 0 turns on: 01 05 00 00 FF 00 8C 3A

Relay 0 is off: 01 05 00 00 00 00 CD CA

//--------------------------------------------

Relay No. 1 turned on: 01 05 00 01 FF 00 DD FA

Relay No. 1 is closed: 01 05 00 01 00 00 9C 0A

//-------------------------------------------

Relay No. 2 turned on: 01 05 00 02 FF 00 2D FA

Relay No. 2 is off: 01 05 00 02 00 00 6C 0A

//-------------------------------------------

Relay No. 3 turned on: 01 05 00 03 FF 00 7C 3A

Relay No. 3 is closed: 01 05 00 03 00 00 3D CA

Single flip instruction:

No. 0 relay flip: 01 05 00 00 55 00 F2 9A

No. 1 relay flip: 01 05 00 01 55 00 A3 5A

No. 2 relay flip: 01 05 00 02 55 00 53 5A

No. 3 relay flip: 01 05 00 03 55 00 02 9A

Fully closed: 01 05 00 ff 00 00 fd fa

Fully open: 01 05 00 ff ff ff fc 4a

Full flip: 01 05 00 ff 5a 00 c7 5a

/************************************************* *********************/

Read relay status 0: 01 01 00 00 00 01 FD CA

Read the status of relay No. 1: 01 01 00 01 00 01 AC 0A

Read the status of relay No. 2: 01 01 00 02 00 01 5C 0A

Read the status of relay No. 3: 01 01 00 03 00 01 0D CA

Relay No.1 Read all channel status: 01 01 00 FF 00 00 3d c9

/************************************************* ********************/

Read all interface input status

01 02 00 00 00 00 78 0a

return:

01 02 01 01 60 48 //IN1 press

01 02 01 02 20 49 //IN2 press

01 02 01 04 A0 4B //IN3 press

01 02 01 08 A0 4E //IN4 press