• Em promoção!
  • -3,80 €
L298N Motor Driver Board
  • L298N Motor Driver Board

Placa driver de motores L298N

:ARD03064
12,90 €
9,10 € Poupe 3,80 €
preço com IVA incluído

Este driver para motores é baseado no controlador de dupla ponte H L298N, que pode ser usado para acionar dois motores DC de até 2A cada, com tensão entre 3 e 30VDC - ou um motor de passo.

Compatível com microcontroladores de 3.3Vdc.

Quantidade

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

The L298N driver module, using ST' L298N chip, can directly drive two 3-30V DC motor, and provide a 5V output interface, power for 5V single-chip circuitry , support 3.3VMCU control. you can easily control the DC motor speed and direction, also control the 2-phase stepper motor. It is essential for smart car.
 


Driver: L298N Dual H Bridge DC Motor Driver IC

Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V
 
Driven part of the peak current Io: 2A
 
The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)
 
The logical part of the operating current range: 0 ~ 36mA
 
Control signal input voltage range:
 
Low:-0.3V ≤ Vin ≤ 1.5V
 
High: 2.3V ≤ Vin ≤ Vss
 
Enable signal input voltage range:
 
Low: -0.3 ≤ Vin ≤ 1.5V (control signal is invalid)
 
High: 2.3V ≤ Vin ≤ Vss (control signal active)
 
Maximum power consumption: 20W (when the temperature T = 75 ℃)
 
Storage temperature: -25 ℃ ~ +130 ℃
 
Other Extensions: control of direction indicators, the logic part of the plate to take power interface.
 
Driver Board Size: 55mm * 60mm * 30mm
ARD03064

Também poderá gostar