Sensor de Chama c/ Relé

:SEN05044
6,90 €
preço com IVA incluído

Sensor de chama com saída a relé.

Através de um potenciómetro consegue defenir a intensidade da chama e acima desse valor a saída a relé é accionada.

A bobine do relé é de 5Vdc, pelo que a alimentação deste módulo terá que ser a 5Vdc.

Quantidade

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

1 Channel 5Vdc Flame Sensor Relay Module info

This sensor switch the relay when it detects fire. It is ideal for projects like fire alarm, fire-extinguishing robot. It works with DC 5V. The light (flame) with a wavelength between 760nm and 1100nm can detect from a maximum of 80cm distance and 60 degrees angle. Its sensitivity can be adjusted through the potentiometer on it. 250V / 10A AC or 30V / 10A DC loads can be switched with the relay.

SEN05044

Também poderá gostar