• -30,00 €
  •  PLA 1.75mm glowFill - Brilha no escuro - 750g
  •  PLA 1.75mm glowFill - Brilha no escuro - 750g
  •  PLA 1.75mm glowFill - Brilha no escuro - 750g

PLA 1.75mm glowFill - Brilha no escuro - 750g

:IMP02012
59,76 €
29,76 € Poupe 30,00 €
preço com IVA incluído

Durante o dia, é uma cor amarelada bonita que depois de impressa possui um bom acabamento. No escuro, as suas impressões vai começar a brilhar de uma forma que não irá acreditar.

Quantidade
Últimos artigos em stock

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

 

 

Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance you've been printing up a storm and need something new.  That's why we've started carrying a complete line of 3D printing filament in a variety of colors!

 

This PLA/PHA glowFill blend 1.75mm 750g spool from colorFabb is a great material for 3D printers. This amazing one of a kind filament will literally make your work shine! A special highly concentrated phosphorescent pigment is matched with PLA/PHA compound. So charge up those 3D prints for some glow in the dark fun!

For a better and longer lasting glow time print your models with 100% infill and charge up your models wiht some high power lights, or just let them enjoy the sunlight for a bit.

 

This filament has been tested successfully on a wide variety of printers, working well on both heated and non-heated build platforms. For those users printing on a cold build platform colorFabb advises applying blue painter's tape to the build area. For heated build platforms colorFabb used a temperature of 55-60°C which will keep the print sticking to the platform. It can be printed straight on glass or with a bit of gluestick applied to it. They've also printed it succesfully on kapton tape with the same temperature settings. Testing showed reliable results using the all metal hot-ends, such as the E3D and the Makerbot Replicator 2 hotend. Hotends which use a teflon isolator coupler can generate adhesion to the copper filament possibly leading to clogs and is there for not recommended for novice users yet.

 

It's always a good idea to check what diameter and filament type your printers can handle before purchasing!

 

For more information on this specific filament check out colorFabb's website! And check out colorFabb's great learn system.

 

 

  • Advised 3D printing temperature: 195-220°C
  • Advised 3D print speed: 40 - 100 mm/s
  • Advised Heated bed (if you have one, not strictly necessary): 50-60°
  • Diameter Tolerance: ± 0.05mm
  • Glass Transition Temperature: 55°C

 

For those of you who want more information on the different types of 3D printing material, there's a great tutorial on our Learn System!

IMP02012

Também poderá gostar