Alimentação - SMPS2Dynamixel
DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL
Se tiver alguma dúvida neste produto não hesite em contactar-nos.
*Atenção: as imagens são meramente ilustrativas.
- This device provides power from the SMPS to the dynamixel.
- Connect the SMPS(for CM-5) to the DC terminal and connect the dynamixel using the cable.
- There are two 3P connector for AX series and two 4P connector for DX/RX series mounted
on the SMPS2Dynamixel. The power and communication line are all connected making it
possible to play the role of the dynamixel expansion bus.
- When controlling the dynamixel with the USB2Dynamixel, power can be easily supplied to the dynamixel.
- Can be used by connecting to a proper DC terminal. Can be used according to the proper voltage of the dynamixel; however, the maximum supply voltage is 20V.
- A shrink tube is used to cover the circuit part to protect it from short circuit from metal
- SMPS2Dynamixel : 1 set
** Please use recommended voltage for every product. Using more than recommended may damage the circuit.
Também poderá gostar