ESP32 c/ Suporte de Bateria 18650 + Display OLED 0.96 Branco

:ARD02098
17,50 €
preço com IVA incluído

Este módulo esp32 wi-fi + bluetooth com gestão de carga de bateria 18650 fornece uma solução perfeita para o problema que frequentemente encontra: Quando desenvolve alguns projetos ESP32, ou seja, deve odiar adicionar um power bank para fornecer energia. Com este módulo já não precisa!

Quantidade
Últimos artigos em stock

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

Description:

ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications.

Features:

  • 18650 charging system integrated
  • Indicate LED inside(Green means full& Red means charging)
  • Charging and working could be at the same time
  • 1 Switch could control the power
  • 1 extra LED could be programmed(Connected with GPIO16[D0])
  • 0.5A charging current
  • 1A output
  • 0.96 inch OLED Display white
  • Over charge protection
  • Over discharge protection
  • Full ESP32 pins break out
  • High performance-price ratio
  • Small volume, easily embeded to other products
  • Strong function with support LWIP protocol, Freertos
  • Supporting three modes: AP, STA, and AP+STA
  • Supporting Lua program, easily to develop

ARD02098

Também poderá gostar