BMS para protecção Baterias 18650 2S 7.4V 7A (redondo)

:BAT04031
3,80 €
preço com IVA incluído

Circuito de proteção (BMS) para 2 células de baterias Li-Ion / Lipo 8,4V. Monitoriza a carga e descarga, protegendo a bateria contra sobrecargas. Tamanho reduzido. Facilita a instalação em packs de baterias 18650. Possui capacidade de carga de até 5A. Sua fonte deve ter capacidade igual ou superior a exigida pelo seu PACK (entre 8,4V a 9V).

Quantidade

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

Specifications:

  • Model: 2S 5A BMS;
  • Charge voltage range: 4.25 +/- 0.05V to 4.35V;
  • Size: 17.3 * 17.3 * 17.3mm;
  • Discharge voltage range: 2.5 +/- 0.05V to 3.0V;
  • Maximum working current: 5A;
  • Working temperature: -40 to +50 °C;
  • Maximum instantaneous current: 7A;
  • Storage conditions: -40 + 80 °C;
  • Static electricity: less than 10ua;
  • Service life: more than 50000 hours;
  • Resistance: less than 300m;
  • Short circuit protection: to protect and restore must charge;
  • Charging voltage: 8.4V to 9V.

Welding point:

  • B+ connect the anode (positive) of the battery;
  • B- connect the cathode (negative) of the battery;
  • MB, connect battery 1 and 2 before the junction points;
  • P+ correct load/unload response (load/unload end sharing);
  • P- respond to negative charge/discharge end (load/discharge end sharing).

HTB1pYclXf1G3KVjSZFkq6yK4XXaV.jpg

BAT04031

Também poderá gostar