li-ion 18650 BMS Charger PCB Prot. Board, 3S 12,6V~14V 6A


3S 6A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For Drill Motor 12.6V Lipo Cell Module 57x17x2.5mm

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

Product Introduction:


  • Model:3 Serial 12V 6A protection board specially for 18650

  • Size:53*17*2.5mm

  • Continuous Operating Current:<6A

  • Charging Voltage:12.6-14V

  • Charging Current:<6A

  • Overcharging Protection Voltage:single cell 4.20V+/-0.025V

  • Overdischarging Protection Voltage:single cell 2.50V+/-0.1V

  • Short Circuit Protection:yes

  • Application Fits:3.7V cell/3 serial

  • Load Power:


1.Firstly detect cell voltage is basically stable,then serial connection
2.When soldering protection board,soldering iron and protection board touch time should not be too long,wihin 1.5s is best








You might also like